Classic Mini 13" Wheel Center Cap 55mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wheel center cap for 13" Mini Wheels with 55mm hole
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Printable wheel center caps for 13" wheels on a classic Mini.
Made to fit my 13" Revo RFX alloy wheels with a 55mm hole diameter.
The original caps clip in. I tried to recreate that, but the clips kept breaking. This version gets fixed with an additional ring inside the wheel behind the small lip the clip normally grabs. The two pieces get screwed together with 4 M3x10 screws in melt in inserts. This means you need to remove the wheel to fit the caps.
There are multiple versions: A multicolor version for multicolor printing (Anycubic ACE Pro in my case), which is shown in the pictures. I sanded the face of the caps flat and painted them with multiple layers of clear coat to get the shiny finish.
Additionally, there is a single color version with the text recessed. You can fill this recess with paint to create the lettering. A third version is without text; in case you want to create your own designs.
Print in PETG or similar with high wall count and infill.
You will need for each cap:
4x M3x10 Screw
4x M3 Washer
4x M3 Brass Heatset insert (Melt in thread) with max. 5mm lenght
You should use locktite on the screws to prevent them coming loose, do not overtighten the screws!
Feel free to remix!