Modular RC Jump for smaller scale RC.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular Jump for Smaller scale RC cars.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
An expandable RC jump. the dove tails have a small amount of play for fitment. I designed .4mm tolerance to allow for material expansion and contraction. Once on the surface you will be bashing/racing on they stay together very well. the photo's show multiple colors, as i photographed the prototypes. There are some surface imperfections because i did not dry the PETG that i used, but it does not impact the usability of the models. 2 wall layers with adaptive cubic infill at 10% is what I used with PETG, but any material should work using whatever settings you want to use for strength. For wider jumps print extra "Middle" sections.