Universal Mount Pin for Technics SL-1210MK2 Cover Socket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal Mount Pin for Technics SL-1210MK2 Cover Socket
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
This simple model is a mount pin for the cover sockets of Technics SL-1210MK2 turntables. It is currently designed to fit an M3 threaded insert, but it can be adapted for smaller/larger diameters. The regular version is flush with the socket (see photo), while the "tall" version adds ~2 mm in height to be flush with the turntable case.
Keep in mind that you should not mount things that may cause vibrations as these will be picked up along with the music. I intend to use the mount pins for the lower rail of a vinyl sleeve stand.
Printing recommendations:
Print upside down.
Use precise outer walls.
Use 5 mm brim to hold the small latch in place while printing.
For a more flexible latch, prefer PET-G over PLA.