1 / 3
MKS Robin Nano v3.X + RPi Zero 2W case with 120mm fan — zdjęcie 1
1 / 3

MKS Robin Nano v3.X + RPi Zero 2W case with 120mm fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Case for MKS Robin Nano MCU, RPi/OPi Zero 2w and 5V regulator. Uses 120mm case fan.

Ocena
0 / 5
Polubienia
2
Pobrania
9
Wydruki
0
Wyświetlenia
89
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
GNU General Public License v3.0

Case for the MKS Robin Nano v3.X, for a klipper setup with a RPi Zero 2w. Also works with Orange Pi Zero 2w. Uses the GYVRM-K240505 24 to 5v 5a step down converter, but the two holes can be adapted to your liking. I also chose to mount a 120mm fan with this for a relatively silent noise profile. A slim 120mm may be an even better option if you're looking to save space! 

Requires an assortment of M2/M3 heat inserts and bolts for easy removal, as well as a 120mm fan.

Print settings I used:

Filament: PLA, PETG or ABS 

Layer height: 0.15-0.32mm

Perimeters: >=3

Infill: At least 30% Gyroid for bottom rigidity