MeshTube - XIAO nRF52840 & Wio-SX1262
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mesh node using a ASTM vacuum tube and a XIAO nRF52840 & Wio-SX1262 kit.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 1570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mesh node using a ASTM F2158 PVC vacuum tube and a XIAO nRF52840 & Wio-SX1262 kit.
Parts needed:
-ASTM F2158 2'' PVC tube cut to 130mm + the length of your antenna
-ASTM F2158 2'' PVC tube cap
-6x M3 x 12mm bolts (Stainless)
-2x M3 x 8mm bolts (Stainless)
-1x PG7 cable gland
-1x M6 enclosure vent (aliexpress)
-1x USB Type-C male PCB breakout connector (aliexpress) or USB Type-C cable cut with male connector.

-1x SMA male to MHF1 (I-PEX) cable (I am using DH-20G50010)
-1x SMA antenna (I am using ANT-916-CW-HW-SMA)
-1x XIAO nRF52840 & Wio-SX1262 kit
-PVC transition cement (work well on PETG for me).
-Connectors and cable of your choice from the node to your power supply.

Parts printed in PETG or ASA. Gasket in TPU. No supports needed.
Enjoy!