Sattelfest - Secure your bike seat!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this model to save my bike seat from getting stolen (Yes. This happens!) Now you can secure it with your lock!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple but elegant solution for securing your bike-seat to the frame of the bike with the lock you already have! This little fellow kept my bikeseat save from petty thieves for over a year now.
It prints without support and will fit different diameters of bike-seat rods.
Since I wanted mine to be sturdy, I printed it with 5 perimeters and 25% infill. It came out rock solid!
For the montage you need 2 M4 x30mm screws and 2m4 nuts. The nuts must be inserted DURING THE PRINT! So make sure to add a short pause in your g-code at the desired layers.
Happy printing!