Empty Tomb - Easter Sunday
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sculpture of the empty tomb, or garden tomb where Jesus was resurrected
- Ocena
- 5 / 5
- Polubienia
- 150
- Pobrania
- 909
- Wydruki
- 4
- Wyświetlenia
- 4376
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed these at the ridiculous 0.03 resolution with a .25 nozzle, overture matte PLA at 190 degrees. Printed using a Prusa Mini with a bondtech extruder. No supports needed, but I did have to do some post process with a heat gun to get rid of minor stringing and the smaller model occasionally has a rope of filament in the inside that you can take out with tweezers. The larger one is 2.5 inches tall and the smaller one is 1 inch tall.
Attributions:
I used the amazing dead tree model found here
https://www.thingiverse.com/thing:4105303
I used a model for rock formations to add textures
https://www.thingiverse.com/thing:2571112
I used a model of a book to mimic the folded cloth https://www.thingiverse.com/thing:2801284