Qidi Box internal desiccant holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Full size rechargeable desiccant holder for the Qidi Box. replaces the 2 smaller ones using the same screws.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 167
- Wydruki
- 1
- Wyświetlenia
- 1286
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A new way to add rechargeable desiccant to the QidiBox (Qbox). this model has 3 parts... Front, back and lid. print each in PETG at a minimum due to heat. Glue the front to the back. fill with rechargable desiccant, (leave room at the top), pop on the lid, Open the Qbox and remove the old holders on either side by removing the screws from the back. hold this new unit in place and use the same screws. re-install your spools and you are set. covers the back span and should help keep RH down inside. big thank you to to @RVfan_2128794
for helping to outline the frame. check his older Qidi models. and see my others as well.