Zebra Mildliner Pen Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hexagon pen holder for Zebra Mildliners
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Pen holder for 61 Zebra Mildliner pens. Enough slots to hold all released pens with room for upcoming sets. The bottom of each opening is felt-lined to cushion pens as they are dropped in. The base has room for weights for nicer feel
Materials
metal washers (optional)
felt (optional)
glue
Instructions
slice the .step file
separate the object into 3 parts
print the base pieces with the walls up
PLA, 0.3mm layer height, supports
optionally: use hot glue to secure weights on the bottom compartment, glue the bottom compartment to the bottom of the holder
Note: I printed with supports and never ended up removing them. They provide a decent cushion for dropping pens and the holder is already heavy enough. I have no doubt adding the weights and felt would be nice.