Jellypig Cordless Vacuum Wall Stabilizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The wall mount that comes w/ the vacuum is too flexible and pulls away from wall, stressing the plastic. This fixes that
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Fits this vacuum, one of the more popular on Amazon: https://www.amazon.com/Cordless-Upgraded-Self-Standing-Anti-tangle-Wireless
The wall mount that comes with this vacuum holds the vacuum up, but there's too much leverage from the weight of the vacuum and the bottom tilts back towards the wall, which seemed like it would eventually break the plastic mount.
This additional stabilizer is intended to mount directly above the wall mount provided by Jellypig.
Printed in PLA with 30% infill. Recommended to print vertical with no supports with a larger than normal brim since the contact area is small (I used 5 layers 0.1mm distant).