Chef's Choice 615 Blade Fastening Screw (S615318 equivalent)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I misplaced the blade fastening screw for my Chef's Choice 615 Electric Meat Slicer. I made a replacement part to…
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 133
- Wydruki
- 1
- Wyświetlenia
- 822
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I misplaced the blade fastening screw for my Chef's Choice 615 Electric Meat Slicer. I made a replacement part to match based on measurements (I did not have the original part to compare to). So this is not a 100% exact match but it should function as well as the original part which is part number S615318 and sold here:
https://chefschoice.com/products/s615318
Note that 3D printing items that come in contact with food is potentially risky due to bacterial contamination. I take no responsibility if you chose to use this part. That said, in my usage, the screw does not come in contact with the items I am slicing so I am not concerned. But please be careful! I opted to use this part instead of purchasing a replacement as it is not in stock at the moment and I did not feel like waiting.
I recommend printing this solid as there are some forces on parts of it that did not hold up even at 60% fill. You may have better luck with your materials. I printed solid in PETG.
I recommend spreading some of the white food grease on the threads to ease insertion. It's a bit of a tight fit however it should loosen up a bit with use.
Tool
If you want some assistance getting the screw on/off the machine, print the included tool as it gives you quite a bit of leverage and is a quick print even at 100% fill. I forgot to flip it over before saving the STL. It will print without supports if you flip it upside down.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
100%
Filament: Sun PETG White
Category: Replacement Parts
