Airbrush Paint Rack System – 26mm Bottles (Homy Arty)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular 26mm bottle racks (Homy Arty) & utility tray for airbrushing. All parts included in the .3mf file.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This rack system is specifically designed for airbrush artists using bottles that are slightly larger than standard Vallejo sizes. It is a perfect fit for 20ml Homy Arty bottles or any bottle with a 26mm outer diameter.
The system consists of three modules:
Large Rack: Holds 35 bottles (7x5 grid).
Small Rack: Holds 14 bottles (2x7 grid).
Utility Tray: A combined bowl for small parts and tools, with dedicated slots for larger Vallejo-sized bottles (cleaners, flow improvers, etc.).
Note: The included .3mf file contains all three parts ready to print.
Weighting Option (Large Model): Inside the .3mf file, the large rack features a modifier that removes the bottom layers in circles under the slots. This allows you to fill the base with plaster or similar materials to add extra weight if desired. I personally found the rack stable enough without it once filled with paint, but the option is available in the slicer settings.
Print Instructions
Material: PLA.
Layer Height: 0.25 mm.
Infill: 20% Lightning infill. I highly recommend this to save a significant amount of material and print time.
Supports: Not needed.