ELM 327 Holder And Remover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder and remover for ELM 327 mini obd 2 reader.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 157
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Designed this after getting my reader stuck in my 06 impreza because they thought it would be a good idea to make it such a tight space.
I made the remover first so I could push it then pull the scanner back.
I then made the holder so its a little more sturdy compared to removers which are supposed to be a little flexible.
So far tried with 2 different cars and both connected well with the holder on.
I suggest printing the holder since its a bit sturdier but if you got your scanner already plugged in and can't get a grip then you should print the remover as they should be able to flex.
I recommend printing with PETG for it to have some flex so it can then snap and grab the scanner.
I haven't tested with any other obd device.