1 / 9
Bruder Recycling Truck - Garbage Mechanism Cog — zdjęcie 1
1 / 9

Bruder Recycling Truck - Garbage Mechanism Cog

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Bruder recycling/garbage truck had a broken mechanism. On the rear of the truck, you can rotate the red knob (left…

Ocena
0 / 5
Polubienia
1
Pobrania
19
Wydruki
0
Wyświetlenia
791
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial

The Bruder recycling/garbage truck had a broken mechanism. On the rear of the truck, you can rotate the red knob (left side of rear) and it will scoop up the garbage dumped into the back and put in into the middle storage area (that expands with the red knob on the top of the truck).

I recreated the broken part and was able to fix the mechanism. It is hard to get it opened without breaking a few clips so I recommend printing some spudger tools and try to put something small under each clip. Patience is key!

Print Settings

Printer Brand:

Creality

Printer:

CR-10S

Rafts:

No

Supports:

Yes

Resolution:

0.2mm

Infill:

100%

Notes:

I used Cura 3.x to slice it and set both the wall thickness and top/bottom thickness to 1.2mm. The part is slightly oversized in some dimensions for strength but it is under some force with a heavy handed child. I used PLA as that is what I have on hand.

Category: Toys & Games

Tagi