Parametric Trio Pendant Light – Sloped and Flat Ceiling Canopy

Design & Installation

The light consists of three individual pendant shades suspended at different heights from a shared canopy. The canopy is split into two parts:

• A wall / ceiling mount that is screwed directly to the ceiling

• A canopy shell that rotates onto the mount, hiding screws and wiring

This two-part approach allows easy installation and removal when access to the wiring is needed.

The canopy geometry compensates for angled or sloped ceilings, keeping the pendant cables visually aligned even when the mounting surface is not horizontal.

Internal Wiring & Cable Management

Inside the canopy (see interior photo), there is space for WAGO 221 lever clamps, mounted using a remixed version of this model:
https://www.printables.com/model/66531-wago-221-mounts

Dedicated printed cable clamps guide and strain-relieve the three pendant cables before they exit the canopy. These clamps are glued in place and ensure a clean cable path and organized interior.

Included Files

The download includes the following parts:

• 3 different lamp shades with integrated mounts

• Canopy shell sloped and flat version (prints flat, print 1×)

• Cable clamp base for strain relief, sloped and flat version (print 3×, get glued into canopy)

• Cable clamp screw to tighten the the clamp around the cable (print 3×)

• Wall / ceiling mount the canopy clips into, same for sloped or flat (print 1×)

Compatibility

The shades are designed to work with the following IKEA components:

• IKEA STRÅLA lamp suspension
  https://www.ikea.com/de/de/p/strala-lampenaufhaengung-weiss-20366404/

• IKEA KAJPLATS LED bulb (E14, opal)
  https://www.ikea.com/de/de/p/kajplats-led-leuchtmittel-e14-806-lm-smart-weissspektrum-rund-opalweiss-00611312/

Other components needed 

• 2x Wago 221 5 bay lever clamps

• Cable to power source

⚠ Note:
The opening of two of the lamp shades is only marginally larger than the bulb diameter. Assembly is tight.

Printing Recommendations

• Material: PLA

• Color: White

• Layer height:

  • 0.2 mm for most parts

  • 0.08 mm for the cable clamps to achieve clean thread resolution

Safety Notes ⚠

• Use LED bulbs only. The shades are designed for low-heat light sources. Do not use incandescent or halogen bulbs.

• You will have to cut the cables of the IKEA components and wire them into the WAGO clamps

• Only perform electrical work if you are properly qualified. If unsure, consult a certified electrician.

• The creator assumes no responsibility. If unsure, consult a certified electrician.