Parallax Mag Release
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A proper lever mag release for the Parallax (not detents)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple, clean mag release for the Parallax. Since it's a bullpup and doesn't need to have some weird mec for a MIG release, you can just stick a paddle in it. So I did.
Down with the ball detents.
The only hardware you'll need for this is a second of the trigger spring the foxbat uses (or almost any of SIlly's usual small springs, or most pen springs).
Put the pin through the release lever, then drop it into the grip/magwell.
Then drop in both spacer blocks
Then assemble like normal. The spring goes at the top back of the release lever, and just sits nicely inside the 'mag release holder' part.