BananaPi-F3 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple case for BananaPi‑F3 that provides easy access to the board’s internal peripherals (work in progress)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
To assemble, you will need 19 screws M3x10 and 2 M3 nuts that fit into these holes.
I also used flat self-adhesive antennas, for which there are spaces on the inner frame.
Later, enclosures for the speakers will be added in several variations, and there are already mounting spaces for them on the inner frame.
Also, please note that the BPI-F3 with the original fan is slightly curved, so the case may bend a bit along with it. There are two ways to address this: either do not use the original fan at all, or replace its spring mounts with bolt mounts.