Lint-Free Wipe Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for 50x50 mm lint-free wipes (e.g., for nail polish remover)
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I loved the idea of StatCat's Square Wipe Dispenser, but the medium size was too short to hold a pack of my wipes and I initially thought the large had too much extra headroom (though, oops, I had mismeasured how tall my stack of wipes would be when resting). I also wanted a wider finger channel to make it easier to remove wipes.
On this one, the channel is 30mm wide, which gives plenty of room for fingers to go in and wipes to come out, while still having about 10mm on either side to keep the wipes in place. I adapted the cover to fit, and made the base in several heights:
100mm tall, which is featured in photos (98mm of usable height inside without the cover; 92mm with the cover on).
120mm tall (118mm inside w/o cover; 112mm inside w/ cover)
60mm tall (48mm inside w/o cover; 42 inside w/ cover)