Sennheiser 6x0 Wire Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a recreation of the wirehousing for sennheiser 6x0 series, though this was done on a 58x. I designed it to…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a recreation of the wirehousing for sennheiser 6x0 series, though this was done on a 58x. I designed it to work with any drivers though if your driver is less than 44mm in total diameter you will need to design a ring to keep the driver in place, feel free to remix this and upload it if you do.
If you do what I did with the ksc75 driver, remove the driver grill completely before installing or it will sound like ass.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament: eSun PLA+ Black
Notes:
Printed with tree supports on BED ONLY. the fit for the plug is tight so if any support is left behind you will need to cut it out.
Category: Audio