Angled Picatinny Dual Demolisher Rocket Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dual post Demolisher Rocket storage with an upwards 45° angle picatinny rail mount
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 1
- Wyświetlenia
- 55
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed an angled mount to store demolisher rockets on my blaster, so I combined and remixed the two original models to give a second mount post and to better fit the space I had.
Requires an M4x35mm socket head screw and nut to secure to picatinny rails.
If the rockets are too loose on the posts, you can wrap some electrical tape along the length to increase the diameter and friction with the rockets.
Printed on a BambuLab P1S in Bambu PLA Matte, 0.2mm layers, 3 walls, 20% gyroid infill, with slim tree supports. I also have bridge flow ratio at 1.5, and all bridge and overhang speeds set to 10mm/s, to improve quality.
Included the plain STL of the remixed piece (grab the small side from the original angled rail model), the 3MF of the print I made with all settings configured for both components, and a 3MF with all the main component pieces separated into parts for further remixing purposes.