1 / 1
Copal 0 to M65 focusing helicoid lens mounting ring. — zdjęcie 1

Copal 0 to M65 focusing helicoid lens mounting ring.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a ring to mount a Copal 0 (or similarly sized lens/shutter combo) to one of the M65x1 focusing helicoids.

Ocena
0 / 5
Polubienia
7
Pobrania
46
Wydruki
0
Wyświetlenia
296
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

This is a ring to mount a Copal 0 (or similarly sized lens/shutter combo) to one of the M65x1 focusing helicoids. Did not think 3d printing such fine metric thread would work, but it does.

Printed with 0.2mm layers, and a 0.6mm nozzle even. I used regular old PLA with 100% infill because it does need to be sturdy and light tight. No support needed.

De rest of the camera can be found here:

Tagi