1 / 1
Front Chain Guard for 32 Tooth Carbon Gates Belt Drive
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For 32t drive sprocket that is common with Pinion Gearbox
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
It's a bit tricky to install, but I assure you it goes on with some finagling. You'll definitely need some patience though.
Has a split in it to install without needing to take the cranks or pedals off. Takes a very firm press to snap into place once lined up.
Designed to work with CC3D's PBT Pro Filament. Should also work fine with other firm flexible filaments, but this PBT is a really good choice for the matte surface finish. I've included the 3MF if you want to use the profile I've created for this filament.