1 / 1
Rook Brick skirt with mounts for 6mm and 12mm switches
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you need to add some toggle switches to your rook skirt, try these
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I took the plain one, and added holes for switches to suit 2x 6mm Diameter switches, and 1x 12mm switch.
I made this as I needed to add some switches for my hotend and parts fan, as well as the mcu. My raspberry pi doesn't like booting with the mcu connected, and as I'm running at 19v, the 24v fans aren't happy either, so I've wired them directly to a boost converter.
This probably isn't useful to most people, but as I made it, I figure I'd share it