Space-Saving Board Game Card Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The minimalistic holder is designed to maximize your table space.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed to maximize your table space, this minimalist holder is perfect for cards that remain in play throughout the game (such as quests, objectives, or reference cards) and don't require constant handling.
Key Features
Minimal Obstruction: The slot is only 4 mm deep, ensuring the holder covers the absolute minimum of the bottom of your card.
Smooth Design: The slot features rounded edges (radiuses) on both ends for a clean look and easy insertion.
Optimal Viewing: Cards are held at a 70° angle for best visibility.
Available Lengths
35 mm: Minimalist (1 card)
60 mm: Standard (1 card)
120 mm: Medium (~2 cards)
175 mm: Large (~3 cards)
230 mm: Extra Large (~4 cards)
Printing Tips
Important: Print the model upside down (with the slot opening facing the printing bed). This ensures the top of the holder has a perfectly smooth finish from the build plate.
Seam Placement: It is highly recommended to align the Z-seam to the rear or front of the model. Avoid having the seam inside the slot (groove), as small artifacts could scratch your cards when sliding them in.
Recommended Printing Settings:
Material: PLA
Perimeters (Walls): 2
Infill: 15%
Layer height: 0.25 mm
Supports: None needed (when printed upside down)