1 / 2
Foot for Tubular Chair-Brenner Stool
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The design is for 13mm diameter metal tubes. I made the ID 12.5mm so it would grip the tube. There is a 3mm peg to go…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The design is for 13mm diameter metal tubes. I made the ID 12.5mm so it would grip the tube. There is a 3mm peg to go into the screw hole to keep the foot from sliding or twisting. I printed this with 95 TPU.
Category: Kitchen & Dining