1 / 3
Tin for wet toilet wipes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tin for wet toilet wipes
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 92
- Wydruki
- 2
- Wyświetlenia
- 740
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (19)Powiązane
This is a tin for wet toilet wipes. I made it for wipes shown in this example. You can buy them in Germany. The box body (with the inner dimensions 114x104x50mm) is very tight with an clearance of 2/10 mm so your printer must be very exact. I used a 0.4mm nozzle and PETG. PLA can have brittle failures. The lid is printed with support.
Edit: for the one who need a bigger opening, I've added one new: ‘Deckel V2’