1 / 4
Wahoo Kickr Core V2 Tennis Ball Rocker Feet — zdjęcie 1
1 / 4

Wahoo Kickr Core V2 Tennis Ball Rocker Feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rocker feet for the Kickr Core V2.

Ocena
5 / 5
Polubienia
23
Pobrania
318
Wydruki
4
Wyświetlenia
1394
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Indoor Sports
Licencja
Creative Commons — Attribution — Noncommercial

I wasn't happy with the available models of these as I find them to be unnecessarily bulky and also elevate the trainer more the necessary, so I designed my own.

I've had these installed for around 2 months of daily riding now and it works great and is alot more comfortable for longer sessions. 

Replaces the original rubber feet of the trainer.

Designed to use 67mm diameter tennis balls (I think this is the standard size). I used Wilson Tour Slam Extra Duty and these work perfectly.

The tennis balls softly "click" into position, stays in place very well and doesn't fall out - so it's easy to lift and move the trainer. 

In CAD these will increase the height of the trainer by ~15mm, but in reality the tennis balls will be slightly squished so it's less then that and personally I did not notice this difference at all and found no need for a front wheel block.

Print settings:

0,2mm layers
5 walls
3 top/bottom layers
25% gyroid infill
No supports needed.

Those are the settings I used with PETG and 0.6mm nozzle.

Fits diagonally on a 180mm bed.

To install these: Remove the screw from the underside of the original feet (3mm hex key). Then just remove rubber feet and slip these rocker feet on and secure them with the same screw. 

Slim / V2 version:
This version uses ~30% less filament and is designed to fit and function the same as the original and it is still plenty strong, and honestly this is the version I would recommend printing, just with the disclaimer that it has not been tested by me. 

Tagi