1 / 3
Edgefinder for angled Parts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jig for milling
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a edgefinder jig for positioning the mill spindle over edges on angled parts. - See photo.
With finding the left and right edge on the jig and using the half function of the DRO the edge of the part is easy to find independent of the angle the part is clamped on the vise. - No complicated math is needed!