Battery for Batteries: Battery Recycling Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery-shaped storage container with a bayonet-style locking lid for collecting spent batteries prior to recycling.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
A functional container designed to store used batteries. The interior height is 206 cm, the interior diameter is 108.6 cm, and the exterior diameter is 115 cm. Since the box can become quite heavy when filled, the wall thickness is designed to be quite strong at 3.2 mm. The plug is only loosely attached and has a through-going recycling logo, which provides ventilation.
Print settings:
Nothing special. it works with any material. Due to the heavy weight when fully packed, I recommend at least 3 perimeters and 20% infill (Gyroid is my favorite). Only the lid requires supports, as the disc is printed separately and glued into the lid (and ends up about 1 mm lower than the edge of the lid).
Tolerances: 0.15 + 0.2 mm for the bayonet and 0.1 mm for the disk. There is a test print for the bayonet lock. If the lock is too tight or too loose, you will need to use the “XY compensation” in the slicer.
Wanna say thank you? 🙏
Feel welcome to use this link for your next Amazon purchase or send me a coffee via PayPal. :-)