Jorgensen F Style Clamp Replacement Pads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement pads for Jorgensen F style clamp meant to be printed in TPU
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
These are almost exact replicas of the pads that come with the Jorgensen F style clamps, I was down to one clamp having both so I decided I would measure up the ones I had left and create some more. The ones that come with the clamps fall off super easy, these ones stay on nice and snug. I designed them to be printed in TPU, I used tree supports for the top pad and I personally printed with 75% infill but anything over 50% should be fine. I would suggest at least 4 wall loops for rigidity. Both are printed with the large flat sides on the bed so they are glass smooth and have 0 imperfections.