1 / 2
Extended Sienci Autozero Plate Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Loved the design by Per S. but wanted it to sit a bit lower below the spoilboard.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 106
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed this upright with manual support under the arch (probably not necessary but I wanted to try the manual option). Printed with Elegoo Rapid Black PETG, .2mm layer height, .4mm nozzle, recommended plate and filament temps.
