Skeleton Rook Shield, with Center mount spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to mount a spool to the center of my Rook, so I modified Kanrog's design to suit, and also removed the panels
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to mount a spool to the center of my Rook, so I modified Kanrog's design, moving the mount for the spool holder across to the center.
I also wanted open panels, so I removed the main panels, leaving just the frame.
There are two versions, the original height, and one that has been stretched by 4mm. My linear rods must have been slightly longer, or they aren't fully seated, as Kanrog's originals were slightly too short. I'm uploading both versions, incase it helps someone out
When I printed this, I printed it from ABS, with 5 wall layers, and something like 30% infill. It seems solid.