Alien Skull
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aliens! Started with a rough shape from an Onshape document I made. Then made it much, much more interesting using…
- Ocena
- 4,8 / 5
- Polubienia
- 179
- Pobrania
- 668
- Wydruki
- 7
- Wyświetlenia
- 2331
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Aliens!
Started with a rough shape from an Onshape document I made. Then made it much, much more interesting using MeshMixer.
10-31-16 Update: added a larger version (180mm tall), smoother one with a hanger slot on the back.
11-1-16 Update: added a smaller version (50mm tall) with hole on back for 12mmx3mm magnet. Also added eyebrow horns and widen the head a bit.
Print Settings
Printer:
Tronxy X3
Supports:
No
Resolution:
0.3mm
Infill:
10%
Notes:
Printed in old ABS. My print room was a bit cool and no enclosure yet, so my ABS split in a few places. But planned on finishing it with acetone so wasn't a loss.
Printed without supports on the back of the head. Took about 6.5 hours on my printer. YMMV.
Post-Printing
Brushed on acetone (only works for ABS and ASA) and then packed the cracks with filament. Then liberally applied more acetone with lots brush strokes removing excess. Let dry a bit and add more.
How I Designed This
Started with a very loose shape I made in Onshape then expected it as an STL into MeshMixer. Then worked it until it was alien enough for me.
Category: Art