Scrappy Jack O' Lantern - fits $1 store LED tealight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted something more frightful, so made a few modifications to Baby Jack. Also, designed a custom support that prints…
- Ocena
- 4 / 5
- Polubienia
- 14
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 519
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Wanted something more frightful, so made a few modifications to Baby Jack.
Also, designed a custom support that prints 25% faster and uses about 25% less material than derived supports. seven with ).4mm clearance they do seem to grip a bit. A forceps works great to dig the support out.
Here's a video of a repair of an earlier support test. Also it shows a cool ABS bubbling texture effect. https://youtu.be/E-5-ciPqluA
Print Settings
Printer:
Tronxy X3
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.24mm
Infill:
10%
Notes:
Custom support is 0.4mm below top. Works fairly well and just back on time and material, but you do need to break it out.
I colored the stem with a green Sharpie. And painted the surface with acetone. Use a heat gun before it dries and the surface will bubble--see video above.
How I Designed This
Onshape. Keeps me inshape.
Category: Decor