K2 (base) - top of chassis frame for filament spools (like TPU) - Not Pro/Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frame for feeding filament (like TPU) from on top of the K2 base printer chassis. Not Pro/Plus.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 149
- Wydruki
- 1
- Wyświetlenia
- 733
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Frame and crossbar for feeding filament (TPU) from the top of the K2 (base) printer chassis. Not Pro/Plus.
I needed this to mount a TPU spool above my K2 for printing. There were many versions for the K2 Plus and Pro, but none that seemed to be for the K2 base size. I based the overall design on some of the others but started from scratch to make sure it fit correctly. And also ensure I could print it on the 260x260 K2 bed.
There are preset holes in the mounts and cross bar so that you can use a standard M3 screw to make it more solid/stable. The cross bar is wide enough to hold two spools if needed.
You'll want a small ~30mm length of PTFE tube to put in the top of the extruder to ensure it feeds in smoothly. You'll also want the frame shifted to the front of the chassis if you are unrolling filament from the front of the spool, and visa versa. This way you keep tension on the spool winding a bit move consistently.
I printed this with PETG for more strength. You can print the crossbar with one leg together, then the other leg separately.
The real world pics are from my prototype build. The model here has a couple of improvements.
3 walls
15% infill
