Light Saber with Clip on Pen Holder and 3D text sign for the Darth Vader Pen Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A light Saber with clip-on Pen holder and clip-on 3D text sign for the LowPoly Darth Vader Pen Holder by jhwblender.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
I think the Darth Vader Pen holder by jhwblender looks really cool. So I made a Light Saber and a clip-on Pen Holder and some clip-on 3D text signs with wordplays of Star Wars quotes for it.
Update 2026-05-03: I made a new 3D Text sign celebrating the upcoming forceful date May Fourth. :) I also made the diameter of the grips in the Pen holder a little smaller. To give it a little more grip around the Light Saber.
They were all printed in Prusament PLA Galaxy Red and Addnorth E-PLA Glitz Black. I simply blended the 2 materials by pausing my printer at a suitable layer and switched filaments. I used a 0,4 mm Nozzle, since my Flashforge printer had problems printing the Prusament PLA Galaxy Red with the 0,6 mm Nozzle. Perhaps due to there is some type of fiber in the filament that builds up extra pressure in the Nozzle.
The Light Saber I printed in vertical position with the handle downwards, and with tree like supports and a raft to stabilize it. I had to shift material in the handle a few layers from where the handle turns into the blade. I tried to shift material where the light blade begins. But I got a too thin and weak connection between the materials then, since the blade is only 4 mm in diameter.
The Pen Holder was printed entirely in Prusament PLA Galaxy Red. This material is a bit more brittle than ordinary PLA, so it should be clipped on to the light Saber carefully. This was also printed in vertical position.
The bottom part of the 3D text Signs were printed in Prusament PLA Galaxy Red and the top in Addnorth E-PLA Glitz Black to make the text more visible. The text is made in the Star Jedi Font. The smaller sign "I am your holder" sometimes need a little support by Vaders knee, otherwise it can become unstable when holding a bit heavier pens.