Vase - 16 pointed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Experimenting with twisting lofts in Onshape, cane up with this vase design. The print in the photos was scaled 125%…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Experimenting with twisting lofts in Onshape, cane up with this vase design. The print in the photos was scaled 125% in the Z direction only.
My spool was binding a bit at the end so the photo has shows some cracks in the layer adhesion.
Printed in glow-in-the-dark (very weakly) PETG from MakerGeeks. Was on sale, so can't complain to much.
Scaled might make nice LED tealight holders.
Timelapse of the print: https://youtu.be/8XWSvPbybXo
Print Settings
Printer:
i300 Pro
Rafts:
No
Supports:
No
Resolution:
0.25mm - 0.4mm nozzle
Infill:
0%
Notes:
Vase mode. 3 bottom layers. No top.
Yes, my printer has noticeable z-banding. It's a feature I wanted--yeah, that's the ticket.(Ball screws shouldn't do this, and eventually will find a way to minimize it--taking suggestions.)
How I Designed This
No apparent twist feature n Onshape so working on some experiments using the lofting feature.
Category: Household