3/4" conduit cutting jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Building the MPCNC (http://www.thingiverse.com/thing:724999) I wanted a jig so I could cut my 3/4" conduit a bit…
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 496
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Building the MPCNC (http://www.thingiverse.com/thing:724999) I wanted a jig so I could cut my 3/4" conduit a bit easier/faster than a pipe cutter. So I designed and printed this. Worked well with my reciprocating saw with the jig temporarily screwed into my wooden deck.
If you find this useful, please encourage me with a tip.
Print Settings
Printer:
i300Pro
Rafts:
No
Supports:
No
Resolution:
0.26mm
Infill:
15%
Notes:
3 shells. Printed with MakerGeeks' higher temp/dishwasher-safe PLA.
Print two of each. The smaller piece is a support to keep the conduit level.Initially thought I could/would mount it to a 2x4. My wooden deck worked in a pinch.
The photos show the first version, but since made it a bit more robust.
Category: Tools