1 / 9
i3 z motor and y motor mount replaces acrylic
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My inexpensive P802M i3 printer kit acrylic motor mounts cracked. I searched high and low, but nothing matched what I…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 197
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
My inexpensive P802M i3 printer kit acrylic motor mounts cracked. I searched high and low, but nothing matched what I needed, so I modeled and printed my replacement parts.
Print Settings
Printer:
Wanhao Duplicator i3
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
25%
Notes:
I printed with fast honeycomb and 3 shells.
Took 3 hours and 5 minutes for a set of z-axis motor mounts at 55mm/s in black PLA.The y-axis took 1 hour and 13 minutes to print.
They seem to fit nicely.
How I Designed This
I used OnShape. Only needed a couple tweaks.
Category: 3D Printer Parts