EffectorMinator 2.0 Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a remix for my needs, with some changes in design.Original by tondenbraber https://www.thingiverse.com/tondenbraber
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a remix for my needs, with some changes in design. Original by tondenbraber https://www.thingiverse.com/tondenbraber, who did an awesome job already with the EffectorMinator 1.5. I don't have magballs so i needed to adapt the design to my type of magnets. I also don't use the Orbiter 2.0, but the Voron M4, so i needed an bowden connector. Last, but not least, i use berd-air, so i changed to this fanduct which is an remix, but i don' remember the original creator, so sorry if you red this. Finally one thing i did myself (first own "design") is the bltouch-holder which needed to be in a specific height.
Printed in Eryone PETG Red
variable Layerheight 0.1-0.15
Linewidth: 0.5
Speed: Inner perimeter 85mm/s, Outer perimeter 100mm/s
Infill: 20% gyroid
Temp: 250°C