1 / 1
"This is Fine!" Seat for 69" EF Turbo Raven — zdjęcie 1

"This is Fine!" Seat for 69" EF Turbo Raven

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I made a seat for my "This is fine!" plushie ... because my flying definitely isn't fine. ;)

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

I printed oriented on its side in LW-PLA with 1 wall loop, no top or bottom shell layers, and 5% infill.  No support required.

This should work with other pilots as well.  I did a little surgery to reduce the weight by removing stuffing and zip tied / safety pinned everything in place.