Densmore 4 typewriter rubber foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement rubber foot for a ca. 1900 Densmore 4 typewriter.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement rubber foot for a ca. 1900 Densmore 4 typewriter. It might work for other Densmore typewriters (Densmore 5?).
Print settings:
I used Siraya Tech Flex TPU - 85A Filament
Shore 95A TPU is too hard.
Softer TPU should work as well, but I haven't tried.
85A gives decent grip on a smooth surface.
I fed the TPU directly to the extruder, no PTFE tubing.
I initially opted for a cylindrical shape, but I don't know what the original shape, below the hole in the machine's frame, might look like, as original Densmore feet are usually completely squashed.
Use the original screw to attach the foot to the frame.
I also provide a more conical design.