1 / 6
USB Port Cover — zdjęcie 1
1 / 6

USB Port Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Let there not be light!

Ocena
0 / 5
Polubienia
7
Pobrania
39
Wydruki
0
Wyświetlenia
153
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

by @CriptasticHacker

Please leave a ❤if you like this design.  It makes me happy :)

My website:

https://cripsrise.neocities.org/

https://hackaday.io/CriptasticHacker

https://www.youtube.com/@CriptasticHacker

 

These print great in any PLA! 

Overture Black PLA used (cheap)

I have a very clean PEI build plate and print with the lid on to retain heat inside (makes a big difference for prints sticking when not using gluestick).

Printed on Creality K1C with "expert mode" to enable -0.025mm Z offset for best bed adhesion (squish)

Layer height = 0.12mm

Temp = 205 c

Bed = 60 c

Standard speeds

Support = tree support

Support x,y distance = 1

Support Z height top distance = 0.3