1 / 1
Shims for reducing looseness in a bevel gear for Velux roof blind — zdjęcie 1

Shims for reducing looseness in a bevel gear for Velux roof blind

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

To reduce play in the bevel gear mechanism of my Velux roof blind, I made this set of shims.

Ocena
0 / 5
Polubienia
1
Pobrania
7
Wydruki
0
Wyświetlenia
41
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The shims are printed in PCTG for greater durability. Select the correct shim based on the level of wear in the bevel gear drive. The shim is intended for the bevel gear that has an internal square socket.

Print instruction:

  • material: PCTG (or similar)

  • supports: no

  • layer height: 0,15mm

  • nozzle diameter: 0,4mm or 0,6mm

  • brim: not required

  • enclosure: not required

Tagi