Atomstack F30 Air Assist Mount for A5 / A5 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount to attach the Atomstack F30 air assist to an Atomstack A5 / A5 Pro using standard 2020 aluminum profiles.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a custom mount for the Atomstack F30 Air Assist, designed for the Atomstack A5 / A5 Pro laser engraver. It mounts directly onto standard 2020 aluminum extrusion profiles, which are used on the A5 series and many similar diode laser frames.
Parts
The model consists of 2 parts:
Front mount (print 2x)
Back mount (print 2x)
Assembly
Mount each back part to the aluminum profile using:
2x M4 T-nuts per back part
Attach the front and back together using:
4x M4x10 or M4x12 screws per mount
The screws self-tap into the back part, no nuts required.
Notes
Designed specifically around the Atomstack F30 housing
Tested on Atomstack A5 Pro
Should also fit other laser frames using similar 2020 profiles
Check the photos for the mounted result and orientation.