Flywoo Explorer LR Immortal-T Antenna Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The possition of the Crossfire Immortal-T antenna on the Flywoo Explorer LR has a quite good position considering…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 448
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
The possition of theCrossfire Immortal-T antenna on theFlywoo Explorer LR has a quite good position considering reception. But it is not protected agains being bend or even damaged on a rough landing.
I therefore designed these holders which one has to swap for the end caps of the antenna. The antenna will not bend anymore. Of course, any hard obstacle will damage the antenna nevertheless, but hopefull some of the damage can be averted with this holder.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30%
Filament: SainSmart TPU blue Post-Printing =============
The gap for mounting the holder on the front arm of the drone is very tight. You may need to pinch it open with a slot screwdriver or a cutter.
How I Designed This
I used Tinkercad. You may alter the design there if you like. The design is only for one side so you have to mirror it for the other side.
https://www.tinkercad.com/things/8ZsyTm39mWY-flywoo-explorer-lr-immortal-t-holder-left-v3
Category: R/C Vehicles