Remsima / Zymfentra Subcutaneous Injector – Travel Case (PLA + TPU)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed travel case for Remsima/Zymfentra injectors using PLA & TPU, rubber bands and an ice pack.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 3D-printed travel case designed to safely transport a subcutaneous injector for Remsima, and it also fits Zymfentra injectors. The case was designed specifically for travel, where protection, insulation, and ease of access are important.
The design consists of four printed parts:
2 rigid parts printed in PLA (structural support and outer protection)
2 flexible parts printed in TPU (shock absorption and secure holding)
When assembled, the injector is held firmly in place. Two rubber bands wrapped around the outside of the case are required to keep the box tightly closed during transport.
⚠ Important:
Please refer to the images provided with this model to understand exact packing orientation and assembly, as correct placement of the injector is essential for safe transport
Intended Use & Real-World Testing
Designed for frequent travel
Easy to open and close, even on the go
Used multiple times in real travel conditions and proven to work well
From my personal experience, the injector is packed together with a gel ice pack, and the medication has safely maintained temperature for up to ~30 hours
Medical & Legal Disclaimer
This is NOT a certified medical device.
It is a personal, community-made accessory, provided as-is.
Always follow the official manufacturer’s instructions for storage and transport of Remsima or Zymfentra
Temperature limits, handling requirements, and transport conditions are defined by the medication manufacturer
Use this case at your own responsibility
Additional Notes
Rubber bands are mandatory for secure closure
TPU is strongly recommended for the flexible parts to ensure proper fit and shock absorption
PLA is sufficient for the rigid structural components
Designed to be compact, protective, and travel-friendly