Safety Lock Bypass for Dremel VersaFlame 2200
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No need to unlock the safety lock every time you want to use your Dremel anymore.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dremel VersaFlame 2200 is great tool for postprocessing our 3D prints or soldering but that child safety lock is just annoying coz you need to unlock it every time you want to use it. So I made this safety lock bypass. Well, you can also just remove the lock but it will just create a hole and that's why I made this. You just unlock the safety lock, unscrew four screws on black plastic, carefully remove the half piece of cover (where the power regulator is), no need to remove another half piece of cover (just don't do it), remove the plastic lock and its spring, insert your printed part, if fits ok (you may do some post process on surfaces that used supports) you just assembly parts back together, enjoy ;) I found the video on youtube where the guy is dissasembling this dremel so you can take a look before you try to dissasemble it your own way.
Warning!! You do it at your own risk and I'm not responsible for anything this may cause and you may also lose the warranty on the product.
Material: PETG
Layer heigh: 0.1mm
Infill: 100%
Supports: yes, organic supports
Orientation: place it circle side down on the bed
