Cat treat lid - reuse for storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lid for use with Temptations brand 16 and 30 oz cat treat containers. Turns them into storage containers.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Print in PETG. Infill doesn't matter - this is a very thin model.
Version 1: To use, the clips go on the outside of the container. I found that pushing one corner diagonally into the lid makes it easier to put it on. This is the only remixed version. 7.05m of filament. Print time 39 mins.
Version 2: I redesigned the entire lid. It snaps on and off without breaking. 8.39m of filament. Print time 39 mins.
Version 3: Redrawn from scratch. This version is a tight fit and snaps around the entire container. Material use is far less than previous versions: 5.44m. Prints in 24 mins
Version 4: Added a lip to make it easier to get the lid off.
Note: only V1 and V2 are a remix of the original. V3 and V4 are my own design.