Kingdom Legacy – Card Box Organizer (All Expansions)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modular card storage solution for Kingdom Legacy: Feudal Kingdom and all its expansions. Available in two sizes.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 202
- Wydruki
- 4
- Wyświetlenia
- 674
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Ultimate Card Storage Solution
for Kingdom Legacy: Feudal Kingdom
(with all expansions - and room for future ones!)
Available in two sizes: Normal and Doubled.
Normal Box (inner length: 160 mm)
Holds up to 533 unsleeved cardsDouble Box
Holds up to 1066 unsleeved cards
Features
Wide enough to hold sleeved cards.
Self-closing shutter door for convenient access
Two types of double-sided dividers: Fixed and Loose
Bottom groove that helps pick up cards that fall to the bottom
Modular design of the Double Box allows easy disassembly into two separate Normal boxes
AMS-supported front panel with the game’s name
Extra space for storing a small notebook, sleeves, Sharpie, or pencil
Dimensions
Outer Dimensions
Normal:
Width: 76.5 mm
Height: 105 mm
Depth: 178 mm
Doubled:
Width: 153 mm
Height: 105 mm
Depth: 178 mm
Inner Dimensions
Width: 67.7 mm
Height: 96 mm
Depth: 160 mm
How to Print & Assemble
Normal Size
Print the Box, Lid, and Shutter first.
1a. If possible, apply a small amount of silicone grease to the edges of the shutter to improve smoothness.Insert the shutter into the groove of the box as shown in the image with the blue box.
Apply super glue to the grooves on the lid.
Attach the lid to the box.
Print the Front.
If you have an AMS, add the
Normal_Size_Box_Front_AMSfile and align it perfectly withNormal_Size_Box_Front.Change the AMS model color to white to achieve a clean two-color front.
Without AMS, you can still add a manual color change at the appropriate layer using only
Normal_Size_Box_Front.
Slide the front panel into the front grooves of the box.
Print dividers as needed.
Double Size
Print:
2× Shutter
Double_Size_Box_Left
Double_Size_Box_Lid_Left
Double_Size_Box_Right
Double_Size_Box_Lid_Right
Double_Size_Box_Connectors
1a. If possible, apply silicone grease to the edges of both shutters.
Insert the shutter into the groove of the right box, as shown in the image with the blue box.
Apply super glue to the grooves on the right lid.
Attach the lid to the box.
Repeat steps 2–4 for the left box.
Slide the connectors into the grooves on the side of the boxes. DO NOT USE SUPER GLUE.
Join the two boxes by sliding the second box into the connectors.
Print the Front.
If you have an AMS, add the
Double_Size_Box_Front_AMSfile and align it withDouble_Size_Box_Front.Change the AMS model color to white for a two-color effect.
Without AMS, use a manual color change on the correct layer with
Double_Size_Box_Frontonly.
Slide the front panel into the front grooves of the joined boxes.
Print dividers as needed.
Dividers
Two types of dividers are included:
Fixed Dividers
Slide into grooves in the inner walls and bottom of the box
Create fixed-sized, unmovable sections
Thickness: 0.8 mm
Loose Dividers
Approximately the size of a sleeved card, but thicker
Allow flexible card organization
Thickness: 0.6 mm
You’ll find dividers labeled for all expansions, plus some extras.
Blank dividers are also included if you prefer custom labeling.
To make the text stand out, apply a color change at the text layer during printing.
Recommended Print Settings
Material: PLA
Infill: 15% Gyroid (for better rigidity)
Disclaimer
Applying silicone grease to the shutter edges is highly recommended for smoother operation.
Alternatively, print the shutter in PETG, which is naturally more slippery than PLA.Use super glue to secure the lid to the box for best durability.
You can print only the left part of the Double Box and use the Normal Box front if you don’t need the full double size yet.
Later, you can upgrade by printing the right part and the wider front panel